（2017-11-23）Automotive glass installation standard construction steps
Automotive glass installation standard construction steps
Standard glass glue construction steps, a total of 12 professional steps, which ensure that each completed glass installation meets the safety requirements, so that construction is more reliable.
The first step, glass plastic preheat 15 minutes (if the temperature is too low);
The second step, the use of professional cleaning agents thoroughly clean the new glass;
The third step is to apply primer on clean glass and dry for 10 minutes.
The fourth step, remove the window trim;
The fifth step, cut the original car glass, remove the old glass;
The sixth step, trim the remnant glue on the frame;
The seventh step, if the car frame exposed metal or paint, these parts need to apply primer;
The eighth step, according to the need to cut a high degree of plastic mouth;
The ninth step, the triangular cross-section sizing;
The tenth step, before the glass plastic table dry, install the glass in the correct position;
The eleventh step, install the window trim, leak test;
The twelfth step, according to different types of plastic, waiting for the appropriate safe driving time, and then normal driving.
